×

You are using an outdated browser Internet Explorer. It does not support some functions of the site.

Recommend that you install one of the following browsers: Firefox, Opera or Chrome.

Contacts:

+7 961 270-60-01
ivdon3@bk.ru

Pulsed regeneration of cationite in a sodium-cationite filter

Abstract

Pulsed regeneration of cationite in a sodium-cationite filter

Bazhanov A.G., Prokopov N.G.

Incoming article date: 03.08.2021

In this work, an experimental model of pulsed regeneration of a sodium-cationite filter was developed. This model can work both with a stationary water flow and with a pulsed one. It is established that at a high pulse frequency, the water flow tends to a stationary one. It is found that at any frequency in a pulsed water flow, hydraulic losses will always be less than at a stationary one. At the same time, the smallest hydraulic losses are observed at a low pulse frequency of 1 Hz, and there is also a decrease in hydraulic losses in the range from 4 to 6 Hz.. It is established that at the same concentration of salt solution, the hardness of the treated water is lower in the pulsed mode than in the stationary mode. At the same time, the lowest stiffness is achieved at a low pulse frequency of 1 Hz. It is established that the time spent on regeneration at an equal inlet pressure will be longer with a pulsed water flow than with a stationary one at any frequency of pulsed regeneration.

Keywords: cationite, water treatment, sodium-cationite filter, stationary water flow, pulse water flow, frequency, salt solution, parallel-flow regeneration, hydraulic losses, pressure