Road surface quality assessment is one of the most popular tasks around the world. To solve it, there are a large number of systems that work using certain algorithms, including methods of morphological image processing. One of the key criteria for the effectiveness of an algorithm is its time complexity. The following approaches of morphological processing is considered in the article: Dilation, Erosion, Morphological Gradient, Morphological Smoothing. Photos of the road surface of various conditions were used as the material for the study. Based on the proposed methodology of the experiment, it turned out that each of the selected algorithms has a linear time complexity, but the "Dilation" and "Erosion" algorithms have lower absolute time indicators.

Keywords: comparison, efficiency, morphological technique, processing, image, photo, road, condition, time, complexity

The article presents the study results of a soil-like fraction contamination at a landfill located on the territory of the Traktorozavodsky district of Volgograd with heavy metals. The soil-like fraction's pollution level was assessed using a cumulative chemical pollution index (Zc) and its modifications. It was determined that the contamination levels with heavy metals are dependent on a used cumulative chemical pollution index modification. The use of the average geometric values of a cumulative chemical pollution index (Zc) is preferred for a pollution assessment of a soil-like fraction. Because the pollution level of a studied soil-like fraction was assessed as hazardous, its use as a recultivation material can only be permitted after a detoxification.The main pollutants in the soil-like fraction are cadmium, copper, and nickel.

Keywords: landfills, soil-like fraction, heavy metals, pollution level

The technological instructions of most converter steel casting shops of modern metallurgical enterprises contain instructions for cutting slabs into to length using a fixed length increase factor that is directly dependent on shrinkage. This does not take into account the chemical composition of steel and the temperature of cutting slabs into exact lengths. At the same time, experience shows that for steels of different grades there is a discrepancy between the planned and actual values of the slab length. This problem required the creation of a mathematical model that makes it possible to determine the values of the linear shrinkage of the slab from cutting to complete cooling. On the basis of this model, a method for calculating the coefficient of increase in the measured length (cutting coefficient) of a slab during cooling from a cutting temperature to 30°C was developed. With the help of the proposed technique, the reduction in the length of slabs of grades 09G2S, 08PS, 22GU was studied. The paper also shows that the dependence of the cutting coefficient on the carbon concentration and temperature before cutting is linear. It was found that the effect of carbon concentration on shrinkage is significantly manifested only at high cutting temperatures (1000-1100°C). On the basis of the dependence obtained, a technical solution is proposed for automating the workplace of the operator of a gas cutting machine (CCT) of the shop for casting converter steel of a modern metallurgical enterprise.

Keywords: shrinkage, slab, mathematical model, cutting coefficient, cutting, thermophysical properties

Background. The solution of design problems in the field of territorial systems management is based on the need for automated analysis of large arrays of geospatial data, including space imagery materials. The purpose of the article is to study and develop effective methods for the semantic segmentation of images containing geospatial data. Methods and materials. The paper studies and uses methods and algorithms for increasing the accuracy and speed of the neural network of the U-Net architecture. Results. Comprehensive studies have been carried out on configuring the U-Net convolutional neural network, in particular, image restoration by nearest neighbor interpolation, adding thinning layers to the architecture. Conclusions. The presented approaches for configuring the U-Net neural network made it possible to increase the accuracy of recognition by the Jaccard metric by 2-3% and increase the speed by 2 times.

Keywords: artificial neural networks, machine learning, deep learning, convolutional neural networks, u-net, semantic segmentation, pattern recognition, geospatial data

The article studies the relevance of online tutoring, considers various existing systems for organizing online tutoring, identifies their strengths and weaknesses, and identifies the most relevant functions of the considered services. The design of the architecture of the developed software product is considered. The goals for further research are defined.

Keywords: online tutoring, tutor, online learning, design patterns, application architecture, information system

The purpose of this work is to implement a system for predicting electricity consumption in food production and to select the most appropriate method for training the forecasting model. In this work, a system was implemented for predicting electricity consumption based on streaming data, which receives them in "real time". The system is implemented on the principle of microservice architecture, where the following were implemented: a service for collecting data from meters, a service for data aggregation and forecasting services. Two forecasting services were implemented: using the classical learning approach based on the ARIMA model and the online learning approach using the HATR online model, the results of which were compared using tests for predicting anomalous values and forecasting under conditions of a change in the data concept, or drift concepts.

Keywords: machine learning, online learning, online model, concept drift, data drift

Noise pollution of the air is considered to be an excess of the natural level of the background noise or a sharp fluctuation and change in such sound characteristics as the frequency of the sound wave and the strength of the sound stream. The article considers noise levels in the mainline territories in a linear city.

Keywords: linear city, traffic noise, highways, air environment, landscaping, equivalent noise level, row of planting, arboretum composition

The concept of a fibrous material (hereinafter referred to as FM) as a soft structure formed by fiber elements surrounded by air and areas of fiber interaction on touch surfaces is proposed and substantiated. The fiber elements are in a deformed state. The deformation of the fibers is reversible, elastic-elastic. In the areas of interaction between the fibers, the forces of adhesion and dry friction act. The deformation of the fibers leads to the preservation of residual internal energy in the material. At low loads, the FM can change its state reversibly. At high loads, the structure of the interaction sites irreversibly changes. The processes of aging and degradation of FM are gradual irrevocable transitions from one group of states to others. The dynamics of these processes is statistical in nature. Therefore, a Markov model of state change has been developed in the form of several subsets of irrevocable subsets and one ergodic subset of states. At the qualitative level, the possibility of using the proposed model to describe the dynamics of FM aging processes and estimate the duration of this process, taking into account its probabilistic and statistical nature, is shown.

Keywords: fibrous material, aging, soft structure, elasto-elastic deformation, irreversible process, markov model, statistical dynamics

The article considers the process of relaxation of fibrous material after the action of the load on it is completed. A simple model of the relaxation process is constructed in the form of an exponential function, which describes this process quite accurately. It is determined that the relaxation time estimates are robust with respect to the parameter distributions. The constructed relaxation models make it possible to estimate the magnitude of the residual relative strain corresponding to the plastic strain of the material.

Keywords: relaxation, deformation, fibrous material, robustness, Monte Carlo method, exponential model, regression

The article considers the assessment of the construction of social facilities in the development of territories of integrated development on the example of Rostov-on-Don. As part of this, the analysis of the territorial needs of the city of Rostov-on-Don in the construction of social institutions, spatial analysis of the placement of territories of complex development was carried out. A project for the construction of a preschool institution using green technologies has been developed and the effect of the results of the construction of the projected preschool institution has been calculated.

Keywords: сonstruction, preschool, integrated development, territory, project, urban environment

The search for orthogonal and quasi-orthogonal matrices is considered as a sequence of setting initial conditions, choosing an implementation method, filtering a set of generated sequences. It is proposed to accelerate the search for matrices by pre-fixing their structure and filtering the generated sequences using the Fourier spectrum. Fixing the structure involves using the symmetry properties of the desired matrices. Filtering allows you to exclude sequences with explicit spectrum outliers when forming blocks of symmetric matrices.

Keywords: mining of matrices, Hadamard matrices, Propus conctruction, filtering sequences

The technology of erecting inverted green roof in exploited roofs is becoming increasingly relevant in modern construction in accordance with the principles of sustainable development and energy efficiency. However, the theoretical support for the design and construction of an inverted roof is still not enough – there is no comprehensive analysis of the roof structure, which would comprehensively take into account various criteria. The study developed mathematical models of three systematized groups of erection of inverted roofs (on supports, without supports and roof-parking) according to three enlarged criteria that comprehensively characterize their design: tecnological efficiency, resource efficiency and environmental friendliness. The results of the study make it possible to determine the optimal solutions for roofing at the stage of variant structural and technological design for their further improvement and application in construction practice.

Keywords: inverted roof, exploited coating, system of criteria, systematization, structural and technological design, variant design, expert analysis, mathematical modeling, technological efficiency, efficiency, environmental friendliness

The article describes the study of the behavior of the reaction vector in the contact spot of the wheel with the support base when the values of the angle of rotation of the driving wheels vary. To find the dependence of the values, a MATLAB Simulink model was created with software blocks that allow determining the behavior of the reaction vector in the contact spot of the wheel with the support base when the values of the angle of rotation of the driving wheels vary.

Keywords: controllability, mathematical model, wheeled vehicle simulation, wheel tire, wheel rotation angle, MATLAB Simulink

The main provisions of the methodology for modeling organizational risks inherent in domestic companies are considered, while taking into account such important factors as the likelihood of an accident and the severity of possible consequences. It is advisable to identify organizational risks of companies and assess them before the onset of consequences; for this, indicators are presented that help prevent the occurrence of adverse events. The onset of adverse events leads the company to deviations in the main indicators characterizing the activity. The scientific problem that requires scientists to solve is the emergence of organizational risks at the strategic and tactical levels of companies, due to fatal mistakes of management. The scientific novelty of the presented research: the main provisions of the methodology for modeling the company's organizational risks are formulated; indicators are shown that contribute to the prevention of adverse events. Further research is related to the development of methods for assessing organizational risks by domestic companies, taking into account the specific, geographical features of doing business.

Keywords: organizational risks, indicators, factors, company, modeling, probability, assessment, methodology, results, events, consequences, indicators, business

This paper presents a simulation of the vibrations of a membrane in the form of a rhombus. Partial solutions of the problem of free vibrations of a membrane with different initial conditions are obtained and the natural frequencies of vibrations are found. The result obtained can be used to strengthen the structural elements of aircraft with a cellular diamond-shaped structure, as well as in the design of unmanned drones of the flying wing type.

Keywords: free vibrations of a membrane, a membrane in the shape of a rhombus, natural frequencies of vibrations