As is known, currently in a model gidrodinaimcheskoy sliding bearing lubricant widely used micropolar lubrication. A major shortcoming of existing working models of bearings running on micropolar lubricant is that this does not take into account the dependence of viscosity characteristics of the micropolar lubricant on the pressure. Naturally, there is a need not only into account the dependence of viscosity characteristics of the pressure in the development of an analytical method for predicting the optimal carrying capacity characteristics inherent MICROPOLAR grease, but also predict the optimal profile of the reference surface of the radial bearing. [1-3 ]Solving this problem is devoted to this work.

Keywords: porous bearing, friction regime, the permeability of the porous layer, the viscoelastic lubricant.

The ability to choose the right anti-wear additives [1-6 ] allows you to create lubricants , which are thin layers have different properties than in large volumes. It is commonly assumed that the additives are functioning only in the zone boundary lubrication and are outside the scope of the hydrodynamic theory of lubrication . However, the beneficial effect of additives as indicated in many studies [1-5 ] we have in the " thin layer" of hydrodynamic lubrication .As is well known , lubrication bearings operate on different types of lubricants which are composed of base oil and additive compositions that provide the required functional properties of the oil . Additives polymers with high molecular weight oils impart viscoelastic properties . Analysis of existing studies [ 7-9] on the calculation of bearings running on a viscoelastic lubricant , shows that they do not take into account the dependence of the viscosity and shear modulus of the pressure and temperature, and mode of friction is assumed laminar. It is known [ 10 ] , high-speed bearings operating in turbulent friction , higher pressure and higher temperature, and so the development of methods for calculating the bearings running on a viscoelastic lubricant requires consideration of the above factors.In connection with the above written shall first develop the computational model of thrust bearings running on micropolar lubricant with the viscosity characteristics of the lubricant on the pressure in contrast to the existing theoretical models do not take into account these dependencies (task 1).And then consider the calculation model of extra load -bearing capacity , working on a viscoelastic lubricant for the dependence of its characteristics on the pressure (objective 2).

Keywords: thrust bearing with the abutment surface adapted, non-Newtonian lubricants

The author reviews the basic content of  marketing competence in theoretical terms.  The marketing competence includes  situational forecasting orientation for  effective marketing communications building at promoting business services.

Keywords: marketing competence, situationally-future orientation, marketing communications, business, management service

This paper outlines the implementation of computer model of second-order visual mechanisms that are specific to spatial contrast modulations, and represents the results of testing the model. Computer simulation is based on "Filter-Rectify-Filter" model with some important additions. The inhibitory parts of receptive field of simulated mechanism are non-selective to orientation and spatial frequency of texture elements. Texture modulated by orientation or spatial frequency does not reduce flank inhibition and does not activate the mechanism. Unmodulated texture  also does not cause activation of the filter because the flanking inhibition will be equal to or exceed the excitation. However, increasing the contrast in the center and reduction it on the flanks leads to the activation of the second order mechanism.

Keywords: Second order visual mechanisms, image filtering, texture, spatial modulation, computer simulation

The results of research of raw materials of the logs production for timber construction are considered in the article. Length of logs (for 6 meters assortment), diameter of logs (model logs) and shape of butt (an average shape factor of butt) were studied. The model log is a volume of cylinder which is equal to a calculated volume of logs. The theoretical laws of the random variable for these values are found. The Research was conducted at LLC "Biogran" in Petrozavodsk, Republic of Karelia.

Keywords: Woodworking, cylindering, technological line, wood costraction, factors, length of a log, diameter of a log, butt

The possibility of using hydrocyclones combined action principle for the classification of potassium-containing minerals. The results of studies on the structure of the bubble layer in the aeration chamber. Describes the new design of hydrocyclones-flotation.

Keywords: hydrocyclone, skimmer, air core, aeration chamber, flotation, sylvinite

The proposed method of designing hardware components optical switching systems simplifies prototyping and development of systems of optical switching and multi-core VLSI. This method allows to automatically set parameters of the optical system at the design stage, depending on the requirements. This method may be cost-effective at the stage of technical specifications of the project, as will reduce the time required for its coordination between the customer and the design engineer.
At the heart of developing a method of designing systems, optical switching elements is a comprehensive analysis of the equations and functions describing the electrical and optical properties of laser heterostructures, as well as electro-optic modulators and Fabry-Perrot resonators. Fundamental static and dynamic characteristics of semiconductor diode lasers can be calculated by using a set of kinetic equations describing the interaction of electrons, holes and photons in the active layer of the laser structure. At various stages of this method is processing, evaluation and calculation of the main characteristics of the elements of integrated optical switching systems.  

Keywords: optical switching, integrated injection laser, quantum-scale heterostructure, amplitude modulation, terahertz range

The dynamic problem  of an anisotropic poroelastic plane under an influence of point source in the steady-state oscillation mode is studied. An analytical solution of the problem as a single integrals over a finite interval is given. Numerical experiments on the construction of solutions are made and the results are compared with the known classical solutions.

Keywords: poroelasticity, vibrations, anisotropy

The article deals with interference suppression algorithms that arise in the ECG signal by moving of the electrodes due to the motion of the object. It is proposed to use an adaptive filter, which reference signal is provided by the data triaxial accelerometer.

Keywords: electrocardiogram, adaptive filtering, motion artifacts, electrophysiological signal adaptation algorithm

The paper presents an algorithm for calculation program the dispersion of pollutants in the air of industrial premises. The program is designed to evaluate the effectiveness of sanitary hazards of capture

Keywords: efficiency of capture, pollutants, air quality, algorithm, method of large particles

In article statistical data on failures on a linear part of the main gas pipelines are presented, the reasons of their emergence are defined. Standard scenarios of development of emergencies are provided, and also the basic principles of determination of frequency of emergence of failures are shined.

Keywords: accident, analysis, diameter, linear part of the main gas pipelines, depressurization, scenario, pipeline.

"This article is devoted to the development of the method for modeling elements of microsystems technology(MST) of membrane type. In this paper perforated membranes are considered and the impact of perforation on the mechanical properties of the membranes is examined. In numerical simulations of the elements it is proposed to use the equivalent mechanical parameters of perforated membranes obtained at the initial stage of the simulation. This will allow to obtain find the optimal parameters of perforation, reduce the time and resource modeling of MST elements. To test the technique numerical experiments were conducted for the two square membranes with sides 1.5 and 3 mm fixed on the contour of the same thickness. We studied the influence of the size of the perforation on the equivalent Young's modulus of the perforated membrane. "

Keywords: microsystems technology, numerical modeling, perforated membrane

In article the way of definition of a technical condition of the household refrigerating device providing its simplification, raising reliability and autonomy of process of an estimation of its technical condition is presented .

Keywords: The household refrigerating device, a technical condition, an estimation

Alzheimer's disease is an incurable illness. It affects about half a million people in Russia, and due to the general trend towards aging of the population the number of Alzheimer's disease cases will steadily increase. Insoluble deposits of amyloid beta in the brain tissue (amyloid plaques) are the major morphological characteristic of Alzheimer's disease. It has been found that the increased concentration of copper in amyloid plaques results in copper ions bound to the protein. It is the presence of copper in the binding site triggers of the formation of amyloid plaques. Therefore, the study of the binding site in amyloid beta is of great scientific interest. The local atomic structure of the Cu(I) copper ion binding site in the amyloid beta peptide has been studied by means of XANES spectroscopy. Several model structures obtained by molecular mechanics and density functional theory (ADF code) have been tested. Theoretical analysis of X-ray absorption spectra based on the finite difference method implemented in FDMNES code was performed. An appropriate model structure of the Cu(I) copper ion binding site in amyloid beta peptide has been found.

Keywords: amyloid beta, binding site, Alzheimer's disease, the method of finite differences, Cu(I)

The problem of manufacturing technology heterostructures pezofaza - metal considered in the article. Complexity consists in the fact that during the removal of the polymer in the system at low temperatures are formed porous layers, formed powders separated metal layers, having island macrostructure. One way to solve the problem - reducing the firing temperature heterostructures. Proposed to decrease the sintering temperature by using of functionally active glass-phases. Reducing the sintering temperature of products also allows to replace platinum electrodes inexpensive silver-based alloys. Obtained by solid state reaction method of piezoceramic material has a low sintering temperature (980 ° C) and high electrical parameters. Found that not only the proportion of the vitreous mass, but also their qualitative influence on the properties of piezomaterials    

Keywords: heterostructure glass phase, the sintering temperature, porosity, ferroelectric phase