The results of studies of wet gas purification in a countercurrent scrubber for the purification of hydrogen sulfide-containing combined-cycle waste from oil and gas industry enterprises, and wastewater treatment and transportation systems are presented. A technical and economic comparison of various technologies for the purification of hydrogen sulfide-containing gas mixtures is presented

Keywords: steam-gas waste, hydrogen sulfide, hydrogen sulfide-containing gas mixtures, gas purification, electrochemical oxidation, electrolysis

The article presents a modern technological solution in the field of preparation of hydrogen sulfide natural waters for domestic and drinking and technical purposes. The developed technology of iron-catalytic purification of natural hydrogen sulfide-containing waters in a reactor with an ultrafiltration separator is easy to operate, a small amount of peripheral equipment and a high speed of processes, and also has no by-products and is completely environmentally safe. The proposed technological parameters are experimentally obtained and confirmed using approved scientifically based methods of analysis, the use of metrologically certified instruments and equipment, a large amount of experimental data and their high convergence with calculated values. The presented solution can be recommended for use at water treatment facilities for the purposes of water supply to enterprises, small blue areas and individual households.

Keywords: purification of natural hydrogen sulfide waters, groundwater treatment technology, water treatment, hydrogen sulfide, catalytic iron oxidation, atmospheric oxygen, iron hydroxide, membrane separation, ultrafiltration, innovative technologies

The article presents the results of a study of an automated system of commercial accounting of energy resources. The open architecture of the top-level software of the automated information and measurement system of commercial electricity metering, based on WEB technologies, has been developed and tested, which will allow further research and scientific activities in the field of mathematical and software processing of data on electricity consumption. A module of planning and management of enterprise resources has been developed for the implementation of AIIS KUE in the MCD based on the developed diagram of use cases.

Keywords: WEB technology, automated information and measurement system, electricity, energy consumption, automatic control

This publication is devoted to the method of applying coatings from various materials to carbide cutting tools by the method of electrospark alloying, as well as the experience of using this method in practice. The formation of the surface layer, its structure were studied, and cutting tests were carried out. It has been found that nickel and aluminum coatings are more resistant than copper and zinc coatings.

Keywords: coating, carbide, cutting tool, wear, electrospark alloying, roughness, hardness

The article is devoted to the development of models and algorithms for calculating control (advisory) actions when training operators of technological processes (on the example of reloading processes and, in particular, portal cranes) on computer training complexes (CTC). A complex of models and algorithms is proposed, based on which control actions are calculated regarding discrete crane controls and the possibility of moving the load to a target position with minimization of oscillations at the end point is provided. These models and algorithms use variable parameters of the technological process, described by linguistic variables, and customizable characteristics of crane models and engines, which allows calculating control actions depending on the type of crane, the specifics of the technological process, the training methodology used for operators and other significant factors. Application of the advisory system based on the developed models and algorithms promotes to improve the training process for operators of reloading cranes at CTC and, as a result, to reduce the probability of emergency situations, reduce time and energy costs.

Keywords: computer simulator, reloading processes, portal crane, advisory system, control actions, mathematical modeling, fuzzy logic controller

Results: in this article, the authors reviewed the process of workforce planning on the example of 3 General Contracting organizations. Having the technical documentation on the objects of the General contractors under consideration, the authors were able to deduce the number of workers during the construction of buildings. After analyzing the available statistics, we made a number of graphs showing the movement of monolithic teams on the objects. Based on the resulting graphs, the authors determined the average deviation of the actual number of monoliths from the planned one. Conclusions: the authors analyzed the dynamics of the construction of characteristic objects of different General Contracting organizations, indicating the difference in the values of the planned (projected) and actual labor resources at the facilities. Also, in this article the authors consider a number of the most used in the construction industry software systems for automation of labor resource planning processes, made their analysis and comparison of the main features and characteristics.

Keywords: Software systems in planning, current planning, labor resource, systematization of labor resource fluctuations, automation of planning, production program, labor resource planning

The article is devoted to the design and specifics of the operation of an LED variable irradiation installation for growing plants. The peculiarity of the proposed installation is the periodically changing intensity of irradiation, achieved by alternately switching on and off LED radiation sources. This approach allows you to reduce the power of the power source, which leads to a reduction in the cost of the installation design, improve the quality of the products obtained, thanks to uniform irradiation of plants and reduce the energy intensity of the growing process.

Keywords: led installation, irradiation installation, energy saving, variable irradiation, control unit, microcontroller

This article is devoted to the study of indoor air quality in a higher education institution: assessment of the distribution patterns of suspended solids by equivalent diameters (RM0.5, RM1, RM2.5, RM5 and RM10).

Keywords: indoor air, indoor air quality, air pollution, dust, solid suspended particles, PM2.5, PM10

The article proposes a special device to transport earth when building an underground part by the «top-down» and «top and down» technique. The developed device is fully electrically powered. The proposed technology enables to completely exclude nonproductive movements of excavating and transportation devices to relocate the earth from the working site to the dumping site onto trucks above ground. The device is adapted to work as part of the production line when realizing the “top-down” and «top and down» technology. To exclude load lifting mechanisms for lifting and dumping of the earth onto the trucks above ground, it is proposed to use two lifting rails with hoisting equipment fixed on a metal frame.

Keywords: “top and down” technology, earth works, excavation works, subsurface part of a building, earth movement, tier of a subsurface part of a building

The article provides an analysis of the occupational morbidity of welders, the nomenclature and levels of hazardous and harmful production factors at the workplaces of welders, and also formulates measures for the prevention of occupational diseases and industrial injuries of welders.

Keywords: occupational diseases, dangerous and harmful production factors, occupational risk, special assessment of working conditions

This article is devoted to the study of the characteristics of fine dust particles in the gym. The monitoring of the dust content of the sports premises with fine particles was carried out, and the dispersed composition of the settled dust was also studied. The regularity of the dust distribution in the room depending on the measurement height is analyzed. The analysis of the state of the system of external respiratory organs is carried out.

Keywords: monitoring, gym, dispersion analysis, fine particles, respiratory organs, PM2. 5, PM10, dust factor

The article discusses the need for a cost examination in the implementation of investment activities of renovated objects. The article is devoted to the actual problem of renovation of real estate objects. The key stages of technical expertise and methods for assessing the technical condition are investigated to determine the cost indicators of the renovated object. The article is devoted to a comprehensive study of the factor space, which is formed by technical and geo-economic factors and has a significant impact on the cost indicators of an investment renovation project. The article deals with the problem of determining the investment attractiveness and economic efficiency of renovation. The scientific novelty of the work lies in a comprehensive study of the factor space and cost indicators of the renovated object to determine its investment attractiveness.

Keywords: renovation, cost expertise, cost indicators, investment attractiveness, geo-economic and technical factors

The article discusses the features of the proposed methodology for developing practical tasks for automated control of knowledge and skills in training IT specialists. The methodology is presented using the example of tasks for controlling knowledge and initial skills in the field of software testing and describing the functional requirements for software. The application of the methodology contributes to the development of e-learning tools and distance learning technologies in training IT specialists (in particular, university students in relevant areas). The research is supported by a stipend of the President of the Russian Federation to young scientists and post-graduate students (No. SP-100.2018.5), which was assigned by the grants Council of the President of the Russian Federation.

Keywords: IT specialist, professional knowledge and skills, knowledge and skills control, automated training systems, software testing

The analysis is made of the use of expanded clay gravel in cement-sand mortar in order to reduce ice at the boundary between the pile and the mortar. The application of expanded clay concrete in block-modular buildings is considered. Lightweight design and reduced heatloss are proven.

Keywords: diversification of management, production diversification, financial and economic purposes of a diversification, technological purposes of ensuring flexibility of production

The article presents an analysis of the impact of fine dust particles on the health of builders, released during the production of construction processes and suggests measures to reduce it. A serious threat to the health of workers on the construction site and people living in the vicinity of it is represented by fine dust particles in a suspended state, both in themselves and in the total concentration of harmful air pollution near construction production. Analysis of the monitoring of suspended matter concentrations has shown that the ratio between the time of exposure to suspended dust particles in different concentrations directly affects the health of people. Air pollution in the work area negatively affects performance, causes diseases in workers, and can cause injuries due to reduced visibility. The organization of conditions corresponding to labor protection and safety, healthy environmental conditions on the construction site will ensure an increase in labor productivity by up to 12% and improve the quality of processes performed.

Keywords: environmental safety, environmental monitoring, air protection, ecology in construction, dust suppression, dust deposition, dust collection systems, labor protection in construction