Nowadays, the System on Chip (SoC) industry is rapidly developing. One of the objectives of SoC developers is to provide the most efficient communication between computational units. One of the possible solutions is using Networks on Chip (NoC) of various topologies with different routing algorithms. In this paper, a configurable test environment designed for cycle-accurate NoC simulation as part of a SoC, used to provide statistics about network behavior during test process, is presented. The environment is designed to evaluate NoC performance as part of a specific SoC at the development stage, when there is a full or partial RTL description of the system. The environment configuration options, its application area, general scheme and calculated NoC performance characteristics are considered. As a conclusion, an example of using the environment to evaluate the performance of a specific NoC is described in detail.

Keywords: network on chip, system on chip, performance evaluation, verification

The analysis of accidents on the main gas pipelines was carried out. The mathematical dependences of the volume of gas located in a gas pipeline of various diameters are determined. A nomogram is proposed to determine the volume of natural gas located in certain sections of the gas distribution network.

Keywords: gas pipelines, accident rate, degassing, gas bleeding. gas compressibility factor

The paper analyzes the output parameters of field-effect transistors with a contact gate (controlled junction (p-n junction or Schottky gate)) both from modern highly mobile semiconductors (such as AIIIBV, AIIBVI, etc.) and semiconductors such as Si, Ge. It is shown that when the span regions are reduced to micro- and nanoscale values and conditions for the action of strong electric field strengths arise, it is necessary to take into account the dependence of carrier mobility on this field. Comparative analyses of the obtained results with the classical known ratios are carried out.

Keywords: effective mass, drift velocity, electric field strength, mobility of charge carriers, kinetic energy, current-voltage characteristic, field-effect transistor, sub-gate drift region, threshold field of the Gann effect, saturation field strength

At present time, there are attempts to design and produce forest machines of highly-demanded classes in Russia. The paper evaluates the efficiency of forest machines under identical operating conditions. The analysis showed the possibility of using harvesters and forwarders of joint Belarusian and domestic production for logging works as an alternative to foreign forest machines. Evaluation of proposals revealed advanced Russian and Chinese models of forest machines. The research showed that in our country there are prerequisites for the development of forestry machine-building, while the main problem is the lack of production technologies for the manufacture of modern technological equipment and components. Under these conditions, the evolution of production on the national territory of forest machines and technological equipment without involving domestic or foreign capital and innovative technologies is a difficult task.

Keywords: domestic forest machine building, development prospects, forest machines, production

The topic of balancing on the brink is extremely relevant under present conditions of the real threat of nuclear war. A game-theoretic model is presented that describes the process of brinkmanship using the Caribbean crisis as an example. The results of research on such models and, accordingly, recommendations for decision makers depend significantly on the specific numerical values ​​of the players' payoffs and the probabilities of certain events. Therefore, it is advisable to develop a software package that allows you to set different values ​​of these parameters and conduct simulations for various control scenarios. The article proposes a program for implementing this approach.

Keywords: brinkmanship, extended form games, simulation

The issues of seasonal unevenness of gas consumption for the needs of heating, ventilation and hot water supply of the shopping and leisure complex are considered. Calculations of volumetric and power indicators of uneven gas consumption for 2020-2022 are given according to the data of the archive of gas consumption meters.

Keywords: gas consumption, uneven gas consumption, volume, capacity indicators, shopping center

Electronics is the most capacious and rapidly developing industry in our country. Modern methods of designing electronic devices are unthinkable without the use of computer technology, in particular, specialized programs for computer analysis and modeling of circuit diagrams of the devices being developed. Intelligence is the key link in electronics at the present stage of its development. This is due to the emergence and widespread adoption of microcircuits such as microcontrollers. This aspect provides fundamentally new opportunities for solving a wide variety of tasks, including tasks of a strategic orientation that require prompt solutions. All this became possible primarily because devices based on a microcontroller require algorithmic and further software, which makes it possible to create intelligent systems and devices. One such device will be discussed in this article. The developed device is a system consisting directly of a control system, an actuating device, which is a decision-making device, a power unit and peripheral devices. The article explains the idea, the principle of operation of the developed device, the structural and schematic diagrams of the developed main blocks of the device, as well as their algorithmic support, which is based on the principle of intelligent control. The developed device is designed to automatically maintain the level of illumination at the level set by the operator in the premises of industrial enterprises.

Keywords: intelligent control, sensor unit, binary code, synchronization circuit, transistor switch, bus driver, optosimistor, control system, actuator, power unit

The design of energy-efficient buildings is based on the analysis of the external climatic effects on buildings for various purposes, the parameters of the air environment inside which are well defined. Climate systems of buildings should neutralize the negative impact of the external environment, in particular wind exposure. It determines both the temperature regime of the room and the purity of the air inside them. The complexity of both theoretical research and the organization of field experiments or blowing models of buildings in a wind tunnel makes it necessary to resort to mathematical modeling of the wind impact on the school building based on the StarCCm+ program. Velocity fields were obtained for different directions of wind load, the excess heat loss of the building in certain directions was determined. The possibility of conducting such studies in a wider range of initial and boundary conditions is shown.

Keywords: aeration of residential buildings, mathematical modeling

The article presents the results of a full-factor experiment and analyzesthe impact of various factors, such as the number of transitions a tape machine, the characteristics of an infrared laser diode and a the humidity of the material on the magnitude of the signal response when infrared radiation passes through the tape.

Keywords: fiber mixing quality, infrared estimation method, planning matrix, regression equation, model adequacy

The paper presents the properties and nomenclature of products made of ceramic fiber used for insulating lining in steam reforming furnaces. On the example of the lining of the radiant chamber, the technology of mounting ceramic blankets on anchor studs, which is currently used in the construction and repair of reforming furnaces, is considered. The shortcomings of the existing technology are noted. These include the complexity of the process, the complexity of installation control and the high probability of uneven thermal conductivity of the lining surface due to hidden defects, as well as the spraying of ceramic fiber particles in the air that cause diseases. The nomenclature and technology of installation of insulating lining with ceramic blocks along guide tubes with subsequent resistance welding with the camera body is proposed. The technology will reduce the repair time, improve the thermal conductivity of the camera, reduce the risk of diseases.

Keywords: gas reforming, radiant chamber, insulation lining, ceramic fiber, thermal conductivity of the furnace

This article is devoted to the study of the effect of photocatalytic oxidation together with successive layers of sorbents (shungite, celite) on the efficiency of cleaning the supply air of premises from pollutants of motor vehicles. The studies were carried out with the help of a developed supply ventilation valve with air purification.

Keywords: intensity of ultraviolet radiation, shungite, zeolite, titanium dioxide, adsorption limit, supply air, ventilation valve

Bottom sediments (UP to) are media in which both longitudinal and shear acoustic vibrations can be present. The presence of several velocity components in bottom sediments makes it possible to excite various types of waves, both longitudinal and shear. In this paper, methods of excitation, generation and reception of difference frequency shear waves (RF) created by parametric systems in (DO) in location modes are analyzed. The analysis of their work in the DO is presented, and their comparative characteristics are given in comparison with the excitation, formation and propagation of the field of longitudinal RFCs in the DO. Prerequisites are given for the creation of a parametric profiler working using the method of excitation, generation and location of shear waves in a complex multiphase medium ""water-DO"". A block diagram is presented and the principle of operation of a parametric profiler on shear waves is described. The advantages and disadvantages of this method of location are shown. The conclusion is made about the possibility of creating and ration.

Keywords: parametric antenna, bottom sediments, shear waves, difference frequency waves, parametric profilogaf

The testing of technique for modeling the local atomic structure and X-ray absorption spectra for zinc ions in an aqueous solution in the presence of arachidic acid has been adjusted. Models of the local structure of zinc with different coordination geometries are considered: planar, pyramidal, tetrahedral, and octahedral. The cases of increasing distances between the zinc ion and water molecules in the plane and in the axial direction are simulated for octahedral coordination. It has been established that the most probable change in the local structure of the zinc environment in solution in the presence of arachidic acid is the removal of water molecules from zinc ions in the axial position and their further replacement with the formation of a bond with the carboxyl group of arachidic acid.

Keywords: arachidic acid, lipid layer, local atomic structure, X-ray absorption spectroscopy, total external reflection, zinc, biomembrane, finite difference method, monolayer

The article presents the development trends of prefabricated-monolithic frame systems (PMFS) in the countries of East Asia, mainly China and Japan. The presented PMFS have different features in comparison with technologies used in European countries and the USA, which are dictated by several factors: geographical features, high population density and uneven distribution in the territory, the continuing need accelerate of construction rates. Based on the analysis results of open information sources there were singled out 4 bearing framework formation systems , actively used by the large construction companies. The presented systems combine structural and technological solutions of modular, hybrid and prefabricated-monolithic construction. The use of bearing structures joints which makes it possible to erect buildings with a high class seismic resistance at a significant number of storeys is considered in detail. In the conclusion, the main features of the Asian PMFS, which have no analogues among the other systems, have been summarized. The results obtained can be used as basis for further larger and more effective development of the civil prefabricated-monolithic buildings.

Keywords: civil construction, prefabricated-monolithic construction, modular, hybrid, structural parameters, load-bearing structures, analysis, comparison, advantages, disadvantages

The widespread use of Educational Data Mining (EDM) allows the collection of data in the educational field for the analysis and adjustment of the educational process. Based on the analysis of the areas of training of construction specialties, a choice of job requests from the site was made hh.ru . A chain of nodes has been built in the Knime program for analyzing vacancies in construction specialties. Based on Knime queries, a semantic analysis of employers' requirements for construction specialties was carried out. The dependence of the result of the analysis of employers' requirements on the number of terms in the topic was considered. The preparation of the material was carried out to compare the data obtained from the work programs with the data extracted from the job search site hh.ru .

Keywords: analysis, data, work program, education, query, term, table, employer requirement