Stress-strain state of a triangular membrane panel under the action of various types of lateral loads
Abstract
Stress-strain state of a triangular membrane panel under the action of various types of lateral loads
Incoming article date: 30.03.2024The article contains the methodology and results of theoretical and experimental studies of the stress-strain state of a conical radial-beam dome with triangular shell elements. The results obtained by various methods are analyzed and compared. The triangular membrane panel is part of the radial beam dome structure and consists of a support frame and a steel membrane in the shape of a triangle. The shape of the triangle forming the membrane panel can be different and depends on the number of ribs in the radial beam dome. The supporting contour is a compressed-bending element of the dome and is made, as a rule, from a rolled steel profile with a channel section. The membrane is made of thin steel sheet and attached to the upper flange of the channel with self-tapping screws or spot welding. To assess the strength and deformability of a steel membrane sheet, its operation under the action of a uniformly distributed snow load, an unevenly distributed snow load and a concentrated installation load was considered. Several options for nonlinear static calculations in various computer systems are shown.
Keywords: building structures, wooden structures, membrane panel, stress-strain state, radial beam dome, dome, membrane, design, experimental study