With the use of pulsed laser deposition and carbothermal synthesis а photosensitive structure on the basis of the Schottky barrier Au/ZnO(nanorods)/ZnO(film)/ZnO(nanorods)/Au was obtained. The parameters of the carbothermal method of synthesis of nanorods ZnO were optimized. Under directly applied bias of 7V current sensitivity of luminous flux for this photodetector is observed in the UV and visible regions of the spectrum, and is 0.14 A/W - for 325 nm and 0.18 A/W - to 405 nm, which means that this structure has the ability of potential applications in various fields for the control of UV radiation (for example, for the monitoring of solar UV radiation, control of UV radiation in air and disinfecting water devices).

Keywords: ZnO nanorods, Schottky barrier, photodetector, photosensitivity

The sensor design on surface acoustic waves (SAW), representing the delay line with unidirectional inter-digital transducers (IDT) is considered. The factor of reflection of SAW from the unidirectional IDT loaded on impedance depending on value of resistance connected to it is investigated. On dependence of factor of reflection on size of resistance there is almost linear site at values of resistance more than 50 Ohm. The new design of the connected lattices of nanowire of zinc oxide, having the general resistance in a range of 50-250 Ohm which is connected to reflective IDT as loading is developed.

Keywords: passive sensors, ZnO nanowire, surface acoustic waves, interdigital transducer.

Carbothermal synthesis method on substrates of a-Al2O3 thin film with sublayers ZnO: Ga, using copper as a catalyst for the arrays obtained by varying the zinc oxide rod morphology. It was established that growth of the rods occurs direction perpendicular to the substrate using a thin (~ 1 nm) layers of the catalyst. With increasing thickness of the catalyst layer to 3 nm rods growth occurs at an angle to the surface of the rod with a mutual orientation in the plane of the substrate surface at angles that are multiples of 60 °. Also, the selectivity demonstrated growth ZnO rods arrays on portions of the substrate coated with the catalyst.
Keywords: zinc oxide, micro - and nanorods carbothermic synthesis method, film sublayer growth catalyst.

Keywords:

In the present work we have carried out studies of the processes of growth of zinc oxide nanorods by hydrothermal method on silicon substrates. As sublayer catalyst used growth caused by laser deposition of zinc oxide, various thicknesses. Studied selective growth of nanorods on the microstructure of thin-film sub-layers of zinc oxide obtained by laser deposition. The optimal conditions for the synthesis of: the concentration of Zn (NO3) 2 - 0.4 mol / l, hexamethylenetetramine - 0.4 mol / l, the concentration of NH3 · H2O - 0,01 mol / L -0.01, process time 4:00, the process temperature is 80 ° C. Sublayer thickness of zinc oxide, as shown by experiment, the growth of the rods has no noticeable effect. Oriented arrays of nanorods were obtained up to 500 nm and a diameter of 60-150 nm.
Keywords: zinc oxide nanorods and micro-oriented arrays of nanorods, hydrothermal synthesis method, selective growth, thin film underlayer.

Keywords:

Information about authors of issue №4 (2011)

Keywords: authors